Smart Home Window Curtain Product Features and Introduction

Electric curtain is a part of home theater interior decoration. It consists of curtain controller (control panel) and motor and track. The curtain controller controls the on/off and polarity of the motor power to open and close the curtain, so the control mode is Simple, only need to lay a good power line, leaving the control panel installation site can be. Smart home control host and control panel, through the wireless signal connection.

Curtain control panel

The curtain controller supports most of the electric curtain motors at home and abroad. There are two common curtain controllers, one is a left-right 3-button single-track electric curtain controller and the other is a 4-button dual-track electric curtain controller.

The curtain control panel can control opening/closing operations of the curtains through the panel keys, and can also receive the on/off control of the curtains by the intelligent remote controller or the intelligent control host. Supports most electric curtain motors at home and abroad.

The curtain control panel can control any three-wire (common line, forward line, and reverse line) or four-wire (common line, forward line, reverse line, and ground line) tubular motors. The motor voltage is AC 220Y. The three keys of the panel can realize the forward rotation, reverse rotation and stop operation of the motor.

2. Three-button free stickers

Feel free to paste in the smart home for indoor remote lighting control, curtain control, or context mode that triggers the binding of the smart home control host to perform multiple custom actions.

Free to stick switch can be affixed anywhere in the room, instead of wireless remote control switch.

The size of the optional switch is 86mmX 86mmX 30mm; the transmission frequency is 315MHz; the shielding distance is 20- 40m; the 2,7A/1 2V battery power supply; the operating temperature is -10-40°C: the working humidity is 30%. 80%.

When using a sticky switch, be sure to put a piece of insulating paper on the front of the switch. After the panel is buckled, pull it out of the opening below. If you press and hold the button, the indicator light in the upper left corner will flash normally, indicating that the free stickers are normal. If it is not used properly, or the light on the panel is off, replace the battery in time. When arbitrarily affixing the code to the lighting panel, please confirm that there is no other wireless signal transmission.

With the use of 3 buttons, the switch can be used to control the "window", "stop" and "window" functions of the curtain panel.

3. Curtain control motor

Curtain control motors are used to control the opening or closing of curtains. The curtain control motor can be controlled by a curtain controller or a control host to achieve forward rotation, reverse rotation, or stop operation of the motor. The curtain control motor has three power control lines, one is the forward phase line, one is the reverse phase line, and one is the zero line. When the phase line of 220Y AC is connected with the forward phase line, the motor rotates forward; when the phase line of 220V AC is connected with the reverse phase line, the motor is reversed; when the phase line of 220V AC is in phase with the forward phase and reverse phase When the lines are not connected, the motor stops rotating. In addition, the curtain motor will be limited, that is, when the curtain reaches the end of the curtain motor will automatically stop.