1.Introduction:
High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 meters tall, while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it.
Ordinary Poles Series | ||
Height | Diameter Wall thickness | Flanges |
15m | 120*260 Â 6mm | 600*20 |
18m | 160*320Â Â 6mm | 720*20 |
20m | 250*420 Â Â 6mm 8mm | 750*20 |
25m | 240*480   6mm 6mm 8mm | 850*20 |
30m | 240*620 Â 6mm8mm10mm | 110*30 |
35m | 280*680 Â 6mm8mm8mm10mm | 13000*35 |
2. Usage:
1). Outdoor Yard lighting, Area lighting, Petro-chemical plant, Truck and bus Terminal
2). Railway yards/Ship docks/Airports/Prisons/Parking lots
3). Industrial and commercial sites
4). Overhead Power Transmission/Monopole
5). Telecom antenna mounting, Camera mounting
6). Signage for Petrol Pump
7). Telescopic Tilting Mast
3. Specification
1). Material steel: Chinese steel Q235, Q345, Stainless pipe or other material
2). Finishing: Hot DIP galvanizing with zinc coat thickness 86 microns or Powder coating
3) Shape: Tapered and non-tapered, octagonal, polygonal and round
4) Height: 30M, or as per client requirement
5) Length: Within 14 meters once forming without slip joint.
6) Thickness of bending plate: 2.5mm-65mm
7). Safety: 2.0 or as per design
8). Head Frame point suspension type better for balancing of Lantern Ring
9). Aerodynamic shape and mechanically strong to face wind speed up to 180 km/h.
10). Easiest to install as base is identical from all direction and available in direction and available in direct grouting type and Base Plate bolted type
11). Robust Door opening and locking system increase life of internal accessories
4. Term:
1) 30% T/T in advance, balance before shipment or by L/C.
2) Delivery time: Depeonds on the quantity, usually is 12days.
Contact: | Â zhaodongzhou |
Phone:Â | +86 18652772323 |
1.Introduction:
High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 meters tall, while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it.
Ordinary Poles Series | ||
Height | Diameter Wall thickness | Flanges |
15m | 120*260 Â 6mm | 600*20 |
18m | 160*320Â Â 6mm | 720*20 |
20m | 250*420 Â Â 6mm 8mm | 750*20 |
25m | 240*480   6mm 6mm 8mm | 850*20 |
30m | 240*620 Â 6mm8mm10mm | 110*30 |
35m | 280*680 Â 6mm8mm8mm10mm | 13000*35 |
2. Usage:
1). Outdoor Yard lighting, Area lighting, Petro-chemical plant, Truck and bus Terminal
2). Railway yards/Ship docks/Airports/Prisons/Parking lots
3). Industrial and commercial sites
4). Overhead Power Transmission/Monopole
5). Telecom antenna mounting, Camera mounting
6). Signage for Petrol Pump
7). Telescopic Tilting Mast
3. Specification
1). Material steel: Chinese steel Q235, Q345, Stainless pipe or other material
2). Finishing: Hot DIP galvanizing with zinc coat thickness 86 microns or Powder coating
3) Shape: Tapered and non-tapered, octagonal, polygonal and round
4) Height: 30M, or as per client requirement
5) Length: Within 14 meters once forming without slip joint.
6) Thickness of bending plate: 2.5mm-65mm
7). Safety: 2.0 or as per design
8). Head Frame point suspension type better for balancing of Lantern Ring
9). Aerodynamic shape and mechanically strong to face wind speed up to 180 km/h.
10). Easiest to install as base is identical from all direction and available in direction and available in direct grouting type and Base Plate bolted type
11). Robust Door opening and locking system increase life of internal accessories
4. Term:
1) 30% T/T in advance, balance before shipment or by L/C.
2) Delivery time: Depeonds on the quantity, usually is 12days.
Contact: | Â zhaodongzhou |
Phone:Â | +86 18652772323 |
CREE LED Grow Light can save about 30% cost in the application,mainly lie in LED package cost,light engine production costs and the secondary light distributioncosts, which is great significance for applications and promotion of semiconductor lighting. We could also DIY the led ratio(wavelength ratio) which imitate the natural sun spectrum to help your plants grow in a very natural type of atmosphere, Absolutely, we are the very original and professional OEM/ODM factory, our Cree Led Grow Light have the great cost performance with the new integration technology being used for mass production, partners around the world keep telling us how amazed at the increase in output and the decrease in the energy bill.
Applications
Our professional full spectrum Cree Led Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Key Features
Plug with listed certificate safe to use.
Item Display
The Plug you can choose
Full Spectrum Cree LED Grow Light PAR Value
Our Ageing Test
Package
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Warmly welcome to Visit our Factrory when you come to China.
Cree Led Grow Light
CREE Chips LED Grow Light,CREE LED Grow Light,CREE Grow Light,CREE COB LED Grow Light
Shenzhen Philizon Technology Co.,Ltd. , http://www.philizon.com