Alibaba Cloud 3.1 firmware Cloud Lite Brush tutorial (H8 chip as an example)

First of all, this is not a crack 3.1 firmware. But this brush method is feasible. If the machine is not a 3.0 or later version, you are not suggested to do so.

Note: It is best to download the official latest firmware yourself and customer service as the second step boot.

This firmware is a streamlined version of the 3.1 cloud system, not root (because too lazy to engage in so many things), do not like to brush.

The first step is to press the normal brushing method of your previous brush (not on Baidu), select the first firmware (brush to the last successful, will prompt the brush machine success, direct drawing), then it can not boot, proceed Two-step operation.

1......

2......Select both

3. Enter the official brush machine (I have about 3 minutes)

4. After you finish the brushing machine, if the following appears, pull the cord directly (important) and proceed to the second step

The second step, select the second firmware (that is, the 3.1 original firmware, it is best to use your box brand's official firmware, choose your computer's 3.1 official firmware to brush BOOT)

Brush method: (select single or multiple partition download....) Then just tick the boot (very important), brush machine, prompt success, direct drawing. Go to boot

The correct choice of the second step. Brush time is about 15 seconds, each machine may be different, you can boot after the brush.

Note: After entering the system, the software must be downloaded from the sofa butler. If you click directly on the desktop, it cannot be installed.

Firmware Download: http://bbs.shafa.com/thread-1306694-1-1.html