In addition to being able to give people an examination, scientists at the moment have developed a direct "medication" medical robot that can directly help people treat diseases.
Robots that help expel foreign bodies in the stomach
The new origami robot developed by the Massachusetts Institute of Technology is only as large as a capsule, and the red-colored outer skin is a "swine casing" made from the dried pig's intestine, which is used to encapsulate robots and also to facilitate swallowing. If someone accidentally swallows something, you can take an origami robot. When it reaches the stomach, its skin will expand, and the doctor will use an external magnetic field to control its movement. After searching for a foreign object, the origami robot performs an arrest command, firmly holds it in place, and pulls the foreign body out of the body under the guidance of an external magnetic field.
After a simulation experiment, the origami robot can successfully discharge the coins in the stomach, button batteries, etc. It can even be used to repair the damage on the stomach wall.
Robots that enter the human body for automatic injections
The injection is a painful thing, especially for some patients with chronic diseases, requiring long-term maintenance and treatment. For example, people with diabetes need daily insulin injections to balance blood glucose levels. However, the pain and psychological pressure caused by long-term drug injection are hard to ignore. Researchers have developed a pill robot that can take injections inside the body.
The device, named Rani, has a similar shape to a regular capsule, but it is essentially a small swallowing auto-injector that can deliver drugs directly to the highly-developed intestine wall of blood vessels, allowing the drug to be quickly absorbed into the bloodstream.
After the patient swallows the pills, the shell protects these drug proteins from decomposition in the digestive tract. When it reaches the intestine, the outer shell is degraded by the intestine and the balloon is inflated, prompting the injection made of absorbable material (eg, sugar) to inject the drug directly into the intestinal wall. The intestine dissolves the needle after it dissolves. Finally, air bags and other materials can gradually degrade in the intestines, pass through the intestines and eventually leave the body without risk of clogging.
Researchers say that the intestine is the ideal place for drugs to enter the bloodstream. The device will bring more comfortable and convenient treatment to patients who have long-term injection of drugs such as diabetes, multiple sclerosis and rheumatoid arthritis.
1.0mm (.039″) Pitch Pin Headers
Overview
Antenk offers a variety of high quality and competitively priced 1.0mm pitch single, dual, three, quad row pin (male) headers used in many board-to-board PCB connections, fitting small-sized, densely-packed devices.
This low-profile component is made from high-temperature thermoplastic and is offered with several means of connections and mounting styles such as through-hole (THM) or surface mount (SMT) and can be in vertical (straight), elevated or at a right angle configuration/orientation dissipating current of about 1.0 A or less.
The pin (male) header is generally mated with receptacle or stackable header connectors (female sockets). This types of pin headers are suitable for PCB board to board connection or for signal transmission application.
Applications of 1.0mm Pitch Pin Headers
Its small size is most suitable for PCB connections of small equipment and devices such as WiFi equipment, gaming consoles, measurement instruments, and other equipment in need of a special interface to become interconnected
Mount Type: Through-hole vs Surface Mount
At one side of this pin header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.0mm vertical single row header, 1.0mm vertical dual row header, 1.0mm Elevated single row pin header, 1.0mm Elevated dual row pin Header, 1.0mm Right-angle single row header and 1.0mm Right-angle dual row header are some examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.0mm Right-angle Dual Row pin header, 1.0mm SMT Single row pin header, 1.0mm SMT Dual row pin header and 1.0mm Elevated Dual Row Pin Header are Antenk`s SMT pin headers.
Soldering Temperature for 1.0mm Pitch Pin Headers
Soldering SMT pin header can be done at a maximum peak temperature of 260°C for maximum 60 seconds.
Pin-Type: Vertical (Straight) and Right-Angle
1.0mm pitch headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle male header.
Vertical or Straight Pin (Male) Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.
Right-Angle Pin (Male) Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.
PCB Connector Stacking
Elevated Pin Header Orientation
Elevated pins aka Stacked Pins or Mezzanine are simply stacked pin headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.
Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical male pin header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-50 pins while for dual row, the number contacts may vary from 4-100 pins.
Pin Material
The pins of the connector have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Breakaway design
The pin headers are also equipped with a breakaway design making them fully compatible with their female receptacles.
Custom 1.0mm Pitch Pin Headers
Customizable 1.0 mm pitch pin headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
Male Header Pins,1.0Mm Male Header,1.0Mm Pin Header,1.0Mm Male Header Pins, 1.0mm THM Male Header, 1.0mm SMT Male Header
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com