2. The LED light source is fixed in the heat dissipation position in the light source cavity;
3. The heat dissipation design of the driver of the LED lamp;
4, LED lamp housing heat dissipation design; etc.), these heat dissipation design links are indispensable, if one of the problems often this lamp is the design failure product.
Solving the problem of heat conduction and heat dissipation of LEDs In practical applications, the increase in power will cause the thermal impedance of the package to drop below 10K/W. Therefore, foreign companies have developed high-temperature resistant white LEDs to try to improve the above problems. calorific power LED actually smaller than ten times higher number of high power LED, and also temperature rises sharply so that the light emission efficiency, even packaging technology allows high heat, but the temperature of the LED chip is bonded there may exceed the allowable value In this case, solving the heat dissipation problem of the package is the fundamental method.
Apply thermal silica film to solve the problem of high-power LED lamps?
A: The most common and simple method at present is to use the thermal silica film to transfer the heat generated by the LED light source to the heat sink, and then use the area of ​​the heat sink to heat radiation and air air cooling. It is equal to the solution of the heat dissipation of the illumination source lamp. With the development of high-power, large-size and high-brightness chips, the heat dissipation of LED devices and lamps must be solved. High-power LED lamps use thermal conduction silica gel for heat conduction, heat radiation and natural air cooling. According to the HATIZ theorem of LED, when the LED operating temperature is below 25 °C, the service life is 100,000 hours, and the service life is 25-50 °C. 50,000 hours, 50-75 ° C, the service life is 20,000 hours, 75-100 ° C, the service life is 10,000 hours, 100-125 ° C, the service life is 5,000 hours, 125-150 At °C, the service life is 2,000 hours.
Advantages of Led Grow Light for Marijuana
Long lifetime
Recommended useful lifetime of 50, 000 hours for LED lights the equivalent of
burning a light for 18 hours A day, 365 days a year for seven years and seven months.
Energy efficient
Save 70~85% on power than HID lighting, no need extra blowers and Air conditioning systems for cooling.
Better for plant growth
Plants can use nearly all of the light emitted from LED Lights.
Only about 35% of the light generated by metal halide lamps is useful for plant growth.
Low heat output
LED lights produce very little heat.thermalelectric separation technology and modular fans can control the generated heat amount to be a very low extent.
Features
Deep penetration : Good lighting penetration , can penetrate to the deep of the plants
Modular Internal Build: Fully upgradable, easy warranties
Thermal Management: Custom copper core heatsinks quickly dissipates heat for cool operating temperatures
Powerful: 2nd Generation ultra penetration 5W LEDs light deep into the canopy
Versatile: Power cord available in 85~265V and international plugs
Lighter weight: Much lighter than the same products in the marketplace, safer for hanging .
Plants: Suitable for both vegetative phrase and flowering phrase
Item Display
What is Full spectrum led chip ?
It is the newest trend for indoor plants. Advanced Led Grow Lights chip,not provide sigle color ,provide broad spectrum 400nm~840nm,simialr with sun light ,but most is red and blue,it is best for plant grow.This is a revolutionary step for Grow Light which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Plug with listed certificate safe to use.
The Plug you can choose
Ageing Test
Our Quality Control systems
Package
Application: Greenhouse, Hydroponics, Aeroponics, Home Garden, Farm, Vegetable Shed, Botanic Garden, Flower Exhibitions, Horticulture, Hydroponics, Hemp Cultivations , Medical Plants Cultivations, etc.
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,
low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the
plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,
to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and
hard pericarp.
Our Company
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Professional dedicated to Research, Development, Design, Manufacture of Innovative, Intelligent control and high efficiency Led Grow Lighting for modern agriculture,Marijuana,greenhouse,hydroponics, etc.
Large Capacity Led Grow Light,Led Grow Light For Plant Growing,Led Plant Grow Light,Cob Led Plant Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com