Aluminum 2X0.75mm2 Power Cable Cord with XLPE Insulation

Aluminum 2x0.75mm2 power cable cord with xlpe insulation
Specification:
a.Construction
Conductor: Copper, Aluminum
Insulation: Cross-linked polyethylene (XLPE)
Filler: Polypropylene filament with lapped binding tape 
Binder: Binding tape 
Inner sheath: Polyvinyl chloride (PVC) 
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) 
Sheath: Polyvinyl chloride (PVC) or PE
 
b.Number of cable cores
Single core,two cores,three cores,four cores(Equal-section-area cores or three equal-section-area cores and one smaller section area neutral core),five cores(Five equal-section-area cores or three equal -section-area cores and two smaller section area neural cores).
 
c.Nominal Section
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000
 
d.Features
XLPE  insulated power cable do not has excellent electric, mechanical properties,but also has powerful resistance against chemical corrosion,heat resistance and environmental stress resistance. Its structure is simple. The long period operating temperature is +90 °C. It is convenient to use and can be laid with no restriction of different level.
 
XLPE insulated steel wire armoured power cable: XLPE/PVC insulated power cable has a number of advantages over paper insulated and PVC insulated cable. XLPE cable has high electric strength, mechanical strength, high-aging resisting, environmental stress resisting anti-chemical corrosion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction. 

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silance and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen, low-smoke halogen free, and non-smoke nonhalogenated and three classes of A, B, C.
 
e.Standard
IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request.
 
f.The Rated Voltage (kv)
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35
 
g.Application
1)These cables are most suitable for direct burial or for installation on trays or ducts,  Where there is a risk of mechanical damage, armoured cables should be used.
2) For laying in ground along route with large difference of level able to bear external mechanical forces.
 
h.Model and Name 
  
 
Company Information
HENAN JINSHUI CABLE GROUP CO., LTD specialized in cable's R & D, manufacture and distribution and contributes to promoting Chinese excellent wire & cable products with competitive price in the worldwide market.
As a professional exporter in Chinese cable industry, with our good quality and excellent service, our partner relationship spreads all over Asia, Mid-East, South European, Central America, South American and South Africa area etc.
Sincerely, welcome friends all over the world and gain a mutual progress together in the prosperity future!

Packaging & Shipping
Packaging Details:International Wooden Drums or as customer requires
power supply cable Delivery Time:15-20 days generally


Contacts
Contact person: Alison Shi
  
Cell phone: 0086 15136147191
Website: www.zzjscable.com
Service
1. 30 years manufacture experience.
2. SGS, BV certified factory.
3. The sophisticated management system and management team. ISO9001,14001, GB / T28001 and CE certificate.
4. Geographical location and convenient transportation, saving transportation costs.
5. Full range of products, good quality and reputation.
6. With leading edge technology, dedicated engineers and technicians for oversea sales and service.
7. Advanced service concept and positive attitude.
As a professional exporter in Chinese cable industry, with our good quality and excellent service, our partner relationship spreads all over Asia, Mid-East, South European, Central America, South American and South Africa area etc.
Sincerely, welcome friends all over the world and gain a mutual progress together in the prosperity future!
If you have any interest in our product: AAC, AAAC, ACSR, STEEL WIRE, ABC CABLE, CONTROL CABLE, PVC INSULATED POWER CABLE AND FIRE RESISTANT CABLE, XLPE INSULATED POWER CABLE, ALUMINUM SE CABLE, RUBBER SHEATHED FLEXIBLE MINE CABLES, GENERAL RUBBER SHEATHED FLEXIBLE CABLES, PVC INSULATED WIRE, NYLON JACKETED WIRE, etc, welcome to contact with me any time!
 

Insulation terminal is low temperature suppress joint on the wire, cable or electrical equipment.There are many kinds of insulation terminal name, Insulated Terminals is also known as Cold-Press Terminal, air connector, etc.It is used to implement a accessories, electrical connection in the industry we will insulation terminal is classified into the category of the connector.We may be unfamiliar with insulation terminal, but when it comes to the connector, that we should be more familiar with.So in daily life we what to need to pay attention to in the use of the insulation of the terminals have to know?The dragon overflow terminal is to introduce the insulation terminal use matters needing attention.
A, should fully understand to the insulation of the terminal operation, familiar with the operation method, so as to ensure the correct operation;For the insulation of the terminal does not have the wrong operation, should use color code or markup to be identifiers, or right in front of the connection types are corresponding, and ensure the mutual connection correct positioning;Should pay special attention to prevent error with needle socket inserted, otherwise will damage the insulation terminal, and lead to accidental electrical contact;Should ensure that the insulation terminal connection in place, on special occasions is not easy to check, should be in the corresponding procedures to make detailed rules, and we can check through the looking glass.
Second, insulated terminal termination, shall be in strict accordance with the corresponding termination requirements specification or termination and check, and according to the corresponding node number termination.Selection of cable wires between the insulating layer thickness should be matching with contact element spacing, the cable core should have contact with a terminal matching, when exposed to a cross between, and lines.
Three, welding should according to the bare wire diameter to select the corresponding power electric welding each contact time is generally not more than 5 s, don't let the flux into the insulator should be paid attention to, lest cause the loss of product insulation resistance.
Four, insulated terminal is in a state of separation should be fitted with a protective cap or shall adopt other measures for dust;If the insulation terminal connection are not isolated, for a long time to be able to play on insurance between plug and socket.
Five, cleaning insulation terminal, the silk with anhydrous ethanol can be used for, dry after use.May cause harmful effects in the connector are not allowed to be used in the chemical solvents such as acetone.
Six, insulated terminal connection or separation, should try to make the plug and socket axis line, and the anchorage cable, avoid the plug role by tangential force, prevent cable sagging cause the damage of the connector.
Seven, insulated terminal before is not properly connected or completely lock, ban on electricity.
Eight, fixed in insulation terminals, wiring harness, clamping and so on occasion, use should be threaded connection locking device (locking screw, locking ring, fuse, etc.).
Nine, acceptance and testing insulation terminal, should according to the product related standards and requirements of the specification.Acceptance and inspection has been used by the electric connector, product related standards and operating instructions should be reduce the requirements, on the basis of the use of equipment insulation terminal should be intact, performance qualified;Probe should conform to the requirements of the standard, otherwise easy to jack damage.

Non-Insulated Terminals

Non-Insulated Terminals,Non-Standard Copper Terminals,Copper Wire Terminals,Standard Copper Terminals

Taixing Longyi Terminals Co., Ltd. , http://www.txlyterminals.com