The winding is an important part of the explosion-proof motor. To maintain the winding, the rotor must be extracted from the stator. The cleaning methods are:
1. Dry rub When the surface to be cleaned is easy to access and only the dry dust is to be removed, a clean, lint-free cloth can be used to obtain a satisfactory result. Do not use the backing cloth, because the fluff will stick to the insulating surface to increase the accumulation of dust. Fluff is particularly detrimental to the insulation of high voltage motors because of the possibility of causing corona discharge.
2. Wipe and suction cleaning method You can use a short and hard brush to remove dry dust (can not use metal brushes). Then vacuum it and clean it. This is the best cleaning method because it does not spread and deposit dust on other equipment.
3. Blowing off the dust with the sprayed dry air, only the gap that is almost inaccessible by hand and the motor can't be wet. The direction of the air blowing should not bring the dust to the inside of the motor to avoid it being difficult to remove and may block. Air duct.
key chains,liquid keychains,custom pvc keychains,metal keychains,fancy key chains,custom key chains, keychain for kids,keychain for lady
Shenzhen Konchang Electronic Technology Co.,Ltd , https://www.konchang.com