The eye protection lamp is a type of electronic fluorescent table lamp. The Anhui Provincial Quality Supervision Bureau recently organized supervision and spot checks on such products in Hefei, Suzhou, Wuhu and Chaohu, with many quality problems.
This time, a total of 40 samples from 28 enterprises in Guangdong, Jiangsu and other provinces were selected, and 11 tests including marking, optical performance, stationarity, electrical strength and stroboscopic were carried out. After testing, 40 sets of eye protection products were qualified, 13 groups were qualified, and the total pass rate was 32.5%. The quality problems found in this spot check are mostly safety aspects. The main conditions are as follows: the internal wires and external wires are unqualified; the marking of the marks is not standardized; the processing of the lamps is rough, the internal traces have sharp corners or burrs, and the interior will be installed during the installation. The insulation of the wire is pierced, and there are safety hazards such as short circuit and electric shock.
The Provincial Quality Supervision Bureau reminded consumers that almost all the manufacturers and sellers of eye-protection lamps on the market have hit the "no stroboscopic" card. In fact, in China, there is no uniform national standard for eye-protection lamps, even the manufacturers of eye-protection lamps There is no clear standard for "no stroboscopic". Compared with ordinary table lamps, the eye-protection lamps on the market only improve the stroboscopic frequency through high-frequency electronic ballasts. Their working characteristics and working modes are exactly the same as those of energy-saving lamps that we are familiar with.
Semiconductor global brewing green bright revolution LED light source projection future development trend 07 domestic first-class market modern lantern survey report (Figure) China's lighting industry top ten outstanding figures selection side lighting companies to enter the lighting to separate or merge channel lighting companies to enter the lighting to OEM or Mergers and acquisitions (Figure)
1
This time, a total of 40 samples from 28 enterprises in Guangdong, Jiangsu and other provinces were selected, and 11 tests including marking, optical performance, stationarity, electrical strength and stroboscopic were carried out. After testing, 40 sets of eye protection products were qualified, 13 groups were qualified, and the total pass rate was 32.5%. The quality problems found in this spot check are mostly safety aspects. The main conditions are as follows: the internal wires and external wires are unqualified; the marking of the marks is not standardized; the processing of the lamps is rough, the internal traces have sharp corners or burrs, and the interior will be installed during the installation. The insulation of the wire is pierced, and there are safety hazards such as short circuit and electric shock.
The Provincial Quality Supervision Bureau reminded consumers that almost all the manufacturers and sellers of eye-protection lamps on the market have hit the "no stroboscopic" card. In fact, in China, there is no uniform national standard for eye-protection lamps, even the manufacturers of eye-protection lamps There is no clear standard for "no stroboscopic". Compared with ordinary table lamps, the eye-protection lamps on the market only improve the stroboscopic frequency through high-frequency electronic ballasts. Their working characteristics and working modes are exactly the same as those of energy-saving lamps that we are familiar with.
Semiconductor global brewing green bright revolution LED light source projection future development trend 07 domestic first-class market modern lantern survey report (Figure) China's lighting industry top ten outstanding figures selection side lighting companies to enter the lighting to separate or merge channel lighting companies to enter the lighting to OEM or Mergers and acquisitions (Figure)
1
With zinc as the base,the product is added 2 to 15% aluminium,with welding flux content of 10 to 20%
Wildely used in copper-aluminium,copper bus-aluminium foil,Aluminium-aluminium and aluminium alloy welding.
Welding Wire,Flux-Cored Copper Aluminum Welding Wire,Mig Welding Wire,Aluminium Welding Wires
Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com