The Qingdao Municipal Committee and Oupu Lighting started the city's lamp replacement work yesterday. The Qingdao Municipal Development and Reform Commission also issued a notice a few days ago, announcing that Qingdao will plan to promote the use of 470,000 energy-saving lamps this year. This has made Qingdao a key city in the national high-efficiency lighting promotion work to fully start the replacement of energy-saving lamps.
The State Council recently issued the "Notice on Further Strengthening the Work of Saving Electricity and Saving Electricity" and the "Notice on In-depth Implementation of Energy-Saving Actions for the Whole People", focusing on the specific ways and methods of energy conservation for industry and residents. In these two notices, lighting power saving is not only famous on the list, but also listed in the fifth place of the specific introduction. The notice indicated that in order to save fuel and electricity, the company will focus on key equipments and products with wide application, high potential and quick effect, such as automobile, boiler, motor system, air conditioner and lighting, to accelerate the promotion of high-efficiency energy-saving products and technologies. Application to improve the efficiency of oil use. In terms of lighting and energy saving, three major measures will be taken: first, speeding up the elimination of inefficient lighting products; second, reducing urban lighting power consumption; and third, strengthening lighting power saving management.
Xie Zhenhua, deputy director of the National Development and Reform Commission, said earlier that China will adopt a positive and prudent approach to study the timetable and supporting measures for the phase-out of incandescent lamps to contribute to global greenhouse gas reduction. As one of the important projects for energy conservation and emission reduction, China plans to promote 150 million energy-efficient lamps in the whole society through financial subsidies during the 11th Five-Year Plan period to gradually replace incandescent lamps and other inefficient lighting products. Among them, only in 2008, China will promote 50 million high-efficiency lighting products.
According to industry insiders, since the Ministry of Finance and the National Development and Reform Commission jointly held a national high-efficiency lighting product promotion work conference in Beijing in April this year, and deployed the first batch of 50 million financially subsidized high-efficiency lighting products, the company has won the bid for the company. Energy-saving lamps and lanterns promotion activities were jointly launched in the respective provinces and local government departments. As one of the main cooperative lighting companies in this project, Op Lighting will also provide 2.8 million energy-saving lamps for Shanxi, Shaanxi and Ningxia provinces, which are expected to be completed by September.
It is understood that an 11W energy-saving lamp can replace the 60W incandescent lamp, that is, 80% energy saving, saving 118 yuan per year. Another more extensive calculation, if the incandescent lamps used in China are all replaced with high-efficiency energy-saving lamps, can save more than 60 billion kWh per year, close to the annual power generation of the Three Gorges Power Station.
Notice of the State Council on In-depth Implementation of Energy-Saving Action for All People 2008-08-12
5 major strategic lighting companies take the Olympic car to engage in marketing 2008-08-12
Chinese lighting companies focus on the Olympic era lighting business opportunities 2008-08-12
1
Function description
The socket is ordinary converter,with two output 5V2A power USB power supply at the same time,can be very convenient in use electrical appliances and recharge the equipment at the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The charge apply to full range of international AC output,no-load power consumption less than 0.3W,with short circuit,overload,over-voltage protection,can be convenient for your life and save more energy
Timer Control Time Adgustment
1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .
2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.
3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF
4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.
Failure analysis:
1.check whether the power supply connection is good
2.check whether the USB cable is loosen
Warning Note:
1.Use indoor and dry location ONLY
2.The load max does not exceed 15A 3600W
3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A
4.Always have earth connection for safety reason
5.If in doubt please consult with a qualified electrician
USB countdown timer, USB countdown timer socket, USB timer, USB charger timer, USB timer socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com