High Quality LED Bulb Light Rechargeable with USB Ce RoHS Approved
LED rechargeable bulb light introduction.
When the products are automatically charging in electric power system, when the full power of the light will automatically turn off the charging state, which greatly increased the lamp and the service life of the battery, if the power outage when LED emergency lamp will be converted into their own battery powered lighting automatic transfer successfully in 1 seconds, when the power grid electricity will be automatically converted into charging and lighting condition. If you do not have to turn off the lights switch on it, it is very convenient to make you more intelligent.
Product advantages.
You can charge power by the computer, laptop or charger.
When you move out the USB cord, it also can use for 4~5 hours after fully charging, convenient and energy saving!
led Emergency bulbs remote control USB Cable for outdoor and indoor
This is not normal LED bulb. This rechargeable light can work as emergency lights, portable torch and family lighting.
Never dark in the evening again. Cheap to save your cost quite a lot! Safe without any risks or danges! Best way to light your room! Low electricity consumption, your electricity bill will be cut down sharply.
High Quality LED Bulb Light Rechargeable with USB Ce RoHS Approved
LED rechargeable bulb light introduction.
When the products are automatically charging in electric power system, when the full power of the light will automatically turn off the charging state, which greatly increased the lamp and the service life of the battery, if the power outage when LED emergency lamp will be converted into their own battery powered lighting automatic transfer successfully in 1 seconds, when the power grid electricity will be automatically converted into charging and lighting condition. If you do not have to turn off the lights switch on it, it is very convenient to make you more intelligent.
Product advantages.
You can charge power by the computer, laptop or charger.
When you move out the USB cord, it also can use for 4~5 hours after fully charging, convenient and energy saving!
led Emergency bulbs remote control usb cable for outdoor and indoor
This is not normal LED bulb. This rechargeable light can work as emergency lights, portable torch and family lighting.
Never dark in the evening again. Cheap to save your cost quite a lot! Safe without any risks or danges! Best way to light your room! Low electricity consumption, your electricity bill will be cut down sharply.
Antenk extended its connector product range by SD card connectors. As already mentioned there are various applications, in the past driven by the computer industry, which are using memory cards as well in their end products, single sided pressure contact connectors can be designed and manufactured according to a customer specific requirement based on customer dedicated insulator- and contact dies. Such single sided pressure contact connectors are mainly used as board to board connection on the base of direct contact to the pads on the board.
Compact Flash Card Connector Overview
Store More Memories
Compact Flash storage cards are small, removable, mass-storage devices. They electrically comply with Compact Flash Association standards, the PC Card ATA standard, and run in True IDE mode. These 50-position cards typically hold between 32 MB and 2 GB of memory and are about the size of a matchbook. Antenk`s connectors include headers that can accept Type I (3.3mm thick) or Type II (5.0mm thick) storage cards, flush and raised mounting heights, and ejectors. Antenk Compact Flash card connectors also provide electrostatic discharge protection.Adapter for Compact Flash Card type I and II
Available with various ejectors
Different stand offs heights
Reverse type without stand-off height is not applicable to Compact Flash Card Type II
Compact Flash Card Connector Specification
Insulation Resistance: 1000MΩ at 500V DC
Withstanding Voltage: 500Vrms
Current Rating: 1A AC/DC max.
Contact Resistance: 40mΩ max. at 20mV max.
Operating Temp. Range: -55°C to +85°C
Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak
Mating Cycles: 10,000 times
Materials and Finish
Insulator: LCP, glass filled (UL94V-0)
Push Button: Glass reinforced PBT (UL94V-0)
SMT Metal: Brass, pure Sn
Pivot Shell: Stainless Steal
Contacts: Brass
Plating: Contacts - Gold (15µ[) over Nickel (40µ[), Solder Tails - pure Sn
Compact Flash Card Connector Product Features
Compact Flash Connectors
Robust surface-mountable designs
Proven PCMCIA contact technology
Accepts hardware for mechanical mounting
Top- and bottom-mounting styles
Right-angle and vertical orientations
Compact Flash Connectors Applications
Desktop and laptop computers
Digital cameras
Smart phones
Data recorders
Slot machines
Industrial and embedded computers
SD Card Connector,Tf Card Connector,Sd Card Connector,Natural Cf Card Connector,Compact Flash Card Connector,CF cards types I/II,CF Card connector MA type Adapter,CF Card connector MA type Ejector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com