Nowadays, many users of TV are not satisfied with watching. Now we can use TV as a computer screen and connect them via HDMI cable. Xiaobian is not private, then follow Xiaobian to see how Haier TV is connected to a computer using an HDMI cable.
Tool material:
One Haier TV with HDMI input, one with graphics card with HDMI input; if it is DVI output, you need a DVI-to-HDMI connector with a suitable length of HDMI cable
connection method:
1, install the operating system official latest graphics driver.
2. Close laptops and TVs, connect laptops and LCD TVs with HDMI cables.
3, restart the notebook, turn on the LCD TV, adjust the LCD TV's information source to HDMI mode.
4. Right-click on the laptop desktop and go to the NVDIA Control Panel. Select the display menu on the right and select "Set up multiple monitors" to open the new settings dialog.
5. The system will automatically detect two monitors. If it cannot be detected, point "My display shows" and you can force the display of the LCD TV. We only need to tick the LCD TV, the system will automatically set the LCD TV as the main display.
6. After the above settings, the monitor has successfully switched to the LCD TV. If there is no sound, the next step is to set up a high-definition audio device. From the beginning, go to the Control Panel and click on "Hardware and Sound".
7. Continue to sound equipment. The default option is "Speaker." Use the mouse to highlight the bottom "NVIDIA HDMI Out" and click the "Set as Default" at the bottom.
Tool material:
One Haier TV with HDMI input, one with graphics card with HDMI input; if it is DVI output, you need a DVI-to-HDMI connector with a suitable length of HDMI cable
connection method:
1, install the operating system official latest graphics driver.
2. Close laptops and TVs, connect laptops and LCD TVs with HDMI cables.
3, restart the notebook, turn on the LCD TV, adjust the LCD TV's information source to HDMI mode.
4. Right-click on the laptop desktop and go to the NVDIA Control Panel. Select the display menu on the right and select "Set up multiple monitors" to open the new settings dialog.
5. The system will automatically detect two monitors. If it cannot be detected, point "My display shows" and you can force the display of the LCD TV. We only need to tick the LCD TV, the system will automatically set the LCD TV as the main display.
6. After the above settings, the monitor has successfully switched to the LCD TV. If there is no sound, the next step is to set up a high-definition audio device. From the beginning, go to the Control Panel and click on "Hardware and Sound".
7. Continue to sound equipment. The default option is "Speaker." Use the mouse to highlight the bottom "NVIDIA HDMI Out" and click the "Set as Default" at the bottom.
Alps Detection Switch,Leak Detection Switch,Light Detection Switch,Detection Switch For Camera
DA CHENG MINGHUA LIMITED , https://www.alpsswitch.com