Alkali aggregate reaction test chamber use method - Database & Sql Blog Articles

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

100V, 250mA, surface mount, high speed switching diode

MOS power IC full range

Manufacturers supply LED lamp bead SMD LED 0805 yellow light super bright indicator light dedicated

Product Name: Alkali aggregate reaction test chamber

1. The alkali aggregate reaction test chamber is designed and manufactured according to the national standard requirements for long-term durability test of concrete. It is mainly used in construction units, highway and bridge engineering units and related scientific research quality inspection departments to conduct alkali-aggregate reaction tests on long-term durability of concrete.

Second, alkali aggregate reaction test chamber

Instructions:

1

. Place the instrument in an environment that is dry, ventilated, and protected from direct sunlight

.

2

. Add clean water to the sink. The water level is self-determined by the user, but the water must not pass the electric heating tube.

3

. Turn on the power and have good grounding protection.

4

. Screw the power switch in a timely direction

90

Degree, when the power indicator light is on, the temperature controller displays the current temperature, and sets the temperature controller to the desired temperature. The temperature difference of the temperature controller is

0.5

°C

If the lower limit is set to

79.5

°C

,

Then when the water temperature is

79.5

°C

Start heating

,

Rise to

80

°C

Stop, it is recommended to increase the backlash as much as possible

,

It can reduce the number of times the instrument works and extend the life of the instrument.