Asphalt trichloroethylene recovery instrument works - Huaqiang Electronic Network

Asphalt trichloroethylene recovery instrument

working principle

1.

The container is made entirely of stainless steel and is divided into two chambers with the distillation chamber on the right and the storage chamber (including the condenser) on the left. The solvent in the distillation chamber is approximately

10

Li, the volume of the storage room is

6

l, there is a water nozzle in the lower part of the container, the water nozzle on which the asphalt solution is discharged on the right side, and the water nozzle which discharges the recovered solvent on the left side. There are no two sets of resistance wire heaters under the distillation.

2.

The condenser is located in the upper part of the left side of the reservoir.

8

The layer coil is composed of direct connection with tap water for cooling, and the upper cover is sealed with a corrosion-resistant rubber ring to prevent the vapor gas of trichloroethylene from running out, polluting the environment, the temperature controller is located in the power supply room, and the temperature controller contacts are in contact with the heating medium. , immediately power off when the temperature is set, the whole process is completed automatically.

3.

Two level gauges are installed in front of the object, and the liquid level gauge on the right side is mainly used to check the liquid to be reclaimed. After the rectification is completed, the liquid level gauge can still see the liquid level of the residual liquid, and then turn right again. The residual liquid in the side water nozzle is released. If the liquid level on the liquid level gauge on the left side reaches the upper line, open the left water nozzle and release the cleaned trichloroethylene liquid.

4.

A screen is placed in the funnel to prevent particulate matter from entering the distillation chamber. A splash-proof net is placed in the middle of the funnel, which is placed on the right side when the contaminated liquid is introduced. The lower part of the electrical box is provided with an insulating cover to prevent people from getting an electric shock.