Bulletin category: Domestic tender
Tenderee: Datang Shandong Power Maintenance and Maintenance Co., Ltd. Source of funds: Others (4 bids) Datang Shandong Power Maintenance and Operation Co., Ltd.
December 2016 Class 2 (Secondary) Tender Notice Bidding No.: CWEME-DTJXE-201611SG-01...CWEME-DTJXE-201611SG-06, CWEME-DTJXE-201611SG-08, CWEME-DTJXE-201611SG-09
Industry: Electric Power Industry Labelling Category: Domestic Tendering Information Source of Funding: Self-raised Tenderer: Datang Shandong Power Maintenance and Operation Co., Ltd.
Region: Qingdao, Huangdao District, Qingdao, tender content:
Pursuant to the "Law of the People's Republic of China on Tendering and Bidding" and relevant laws and regulations, the principles of openness, fairness, impartiality, and good faith are followed and commissioned by Datang Shandong Electric Power Maintenance and Repair Co., Ltd., on the second level of the project (see the scope and qualifications of the tender for details). Requests) to conduct domestic open tenders and welcome qualified units to attend the tender.
1 Project Overview:
Datang Shandong Power Maintenance Operation Co., Ltd. (see the tender documents for details).
2 Construction site: Datang Shandong overhauls the project site in Qingdao, Shandong Province and Binzhou City, Shandong Province.
3 Bidding scope and qualification requirements:
Ink2">bidding number
Name
Qualification, performance
CWEME-DTJXE-201611SG-01
Lubei Power Generation 2×330MW Auxiliary Equipment Maintenance (Secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair, trial) of the construction electrical and mechanical installation engineering contractor or third-level or higher qualification for the general contracting of power engineering construction. Maintenance and renovation
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-02
Lubei Power Generation 2×330MW Unit Chemical Specialty Maintenance (Secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair, trial) of the construction electrical and mechanical installation engineering contractor or third-level or higher qualification for the general contracting of power engineering construction.
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-03
Lubei Power Generation 2×330MW Units Pulverizer and Pulverizing System Maintenance (Secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair, trial) of the construction electrical and mechanical installation engineering contractor or third-level or higher qualification for the general contracting of power engineering construction.
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-04
Lubei Power Generation 2×330MW Unit Comprehensive Professional Equipment Maintenance (Secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair, trial) of the construction electrical and mechanical installation engineering contractor or third-level or higher qualification for the general contracting of power engineering construction.
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-05
Lubei Project Department Environmental Protection Equipment Maintenance (Secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair, trial) of the construction electrical and mechanical installation engineering contractor or third-level or higher qualification for the general contracting of power engineering construction.
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-06
Binzhou project shelf insulation daily maintenance (secondary)
1. The company has the qualification of an independent legal entity of the People's Republic of China and possesses professional qualifications for scaffolding and dismantling issued by administrative departments. Special operators have "special operation certificate".
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-08
Huangdao Project shelf insulation daily maintenance (secondary)
1. The company has the qualification of an independent legal entity of the People's Republic of China and possesses professional qualifications for scaffolding and dismantling issued by administrative departments. Special operators have "special operation certificate".
2. For the construction personnel, the personal accidental injury insurance with the insurance amount of no less than 600,000 shall be purchased.
CWEME-DTJXE-201611SG-09
Huangdao project unit maintenance and auxiliary network operation technical service (secondary)
1. The company has the independent legal person status of the People's Republic of China and has the qualifications for the third-grade or third-grade construction contracting (repair and trial) of the construction and electromechanical installation engineering contractor or third-level or higher qualification of the general contractor for the power engineering construction. The special operating personnel have the qualifications. Special Operations Certificate.
2. With the professional qualifications issued by the competent administrative department, the construction personnel will be required to purchase the personal accidental injury insurance with an insurance amount of no less than 600,000.
4 Bidder qualification requirements:
4.1 Must have independent legal personality of the People's Republic of China and have a valid and valid business license.
4.2 The person in charge of the unit is the same person or a different unit that has a controlling or managing relationship and may not participate in the bid for the same tender item or for the same tender item that is not divided into bid segments.
4.3 Shelf insulation routine maintenance project must have the professional qualifications of scaffolding erection and dismantlement issued by the administrative competent department, and the special operations personnel shall have “Special Operation Certificatesâ€; other projects shall be professionally contracted for the construction and electromechanical installation engineering for three or three levels (repair, (3) Qualifications for third-level or higher qualifications of electric facilities permit or general contracting of electric power engineering construction. For the construction personnel, the personal accidental injury insurance with an insurance amount of no less than 600,000 is purchased.
4.4 Qualification requirements: With the corresponding qualifications and capabilities for this tender, see the scope of the tender and qualification requirements.
4.5 Performance requirements: There is a good operating performance of similar projects in China. Please refer to the scope of tender and qualification requirements for details.
4.6 With good bank credit and business reputation, it is not being ordered to suspend business, property is taken over, frozen, or bankrupted.
4.7 The bidder has not breached the contract or been executed in any contract in the past 5 years, or any contract has been cancelled due to the bidder's reason.
4.8 The bidder has not been involved in economic lawsuits due to violations of laws or regulations in the past three years.
4.9 In the last three years, there has been no fraudulent bid, serious breach of contract, no serious or above quality and safety accidents in the contracted project, and no record of safety construction in the past three years (no proof of safety accident).
4.10 There have been no cases of borrowing others or lending qualifications or performance to others.
4.11 The Commonwealth does not accept bids in this tender.
4.12 The bidder should apply for safety production liability insurance for the personnel involved in project construction, handle industrial injury insurance or "personal accidental injury insurance," and submit the relevant certification materials to the tenderer's public security supervision department for supervision and record before signing the contract.
4.13 The bidder shall list the cost of the outsourced project, which is not less than 3% of the total contract price, in the bidding documents. It is used for the purchase of safety belts, gloves, masks, work clothes, anti-smashing shoes, goggles and other safety production protective equipment. The use of Ancuo will be monitored and funds will be earmarked to ensure the safety of the outsourced project.
4.14 This project implements the system of “one card, one cap and one workwear (band)â€. The helmets, safety belts and overalls for construction workers shall be uniformly distributed by the tenderer, and the construction unit shall bear the expenses. The minor projects can be distributed through the use of leases. To ensure the safety of construction workers.
4.15 The bidder shall provide large-scale construction machinery, cranes, electric tools and safety appliances that meet the needs of the construction of the project and ensure the safety of the person and equipment. The electric tools and safety equipment are inspected, stamped with the official seal of the inspection unit, and issued with the certificate of conformity, and shall be within the validity period. Where general contracting of the project is implemented, the general contractor shall ensure that the subcontractor has the ability to provide the above-mentioned machinery, equipment and tools that have passed the inspection.
4.16 The “one-vote veto†shall be implemented for units that do not have the relevant safety production qualifications or qualifications such as business licenses and qualification certificates, legal representative qualification certificates and construction safety licenses issued by relevant counterfeit government authorities. Inclusion in the "blacklist" outsourcing unit of the provincial company, prohibiting bids.
5 How to Obtain Bidding Documents: (.)
Release date: November 15, 2016 to November 30, 2016. (It takes 5 to 7 days to process the CA certificate electronic key, including material preparation, mail processing, and CA certificate electronic key return time. Please properly consider the arrangement processing time. Overdue system will not be able to download the bidding documents and the bidding fee will not be refunded. .)
Bidding document purchase price:
The bidding fee is 524 yuan/lot (CWEME-DTJXE-201611SG-03, CWEME-DTJXE-201611SG-06, CWEME-DTJXE-201611SG-08);
The bidding fee is 524 yuan/lot (CWEME-DTJXE-201611SG-01, CWEME-DTJXE-201611SG-02, CWEME-DTJXE-201611SG-04, CWEME-DTJXE-201611SG-05, CWEME-DTJXE-201611SG-09)
※ Deposit payment: account number and operation are based on the pre-additional table of bidder's instructions for bidding documents. Bid security and bidding fees must be paid by the bidders participating in the bidding of the project in the name of the public account.
6 Submitting bid documents
6.1 Deadline for submitting tender documents (Bid deadline, the same below): December 10, 2016 at 10:00.
6.3 Delivery method: The bidding documents shall be sealed as required and delivered to the designated place. If the goods are delivered late or not delivered to the designated place or are not sealed as required, the tenderee will not accept it.
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Data Centre,Fiber Optic Patch Cord Assembly,Multimode Fiber Optic Patch Cord,Outdoor Fiber Optic Patch Cord
Huizhou Fibercan Industrial Co.Ltd , https://www.fibercan-network.com