Talking about the Excessive Treatment Method of Adhesive at Turning Point of Dispensing Machine

The use of any product can cause problems if it is used for a long time or more, and the use of dispensers is no exception. The common problem is excessive glue on the dispenser's corners, resulting in an excessive amount of glue at the beginning. Too much glue at the corner is due to the speed of opening the glue, and the running speed of the glue at the turning point is relatively slow. This is the main reason that leads to excessive glue, and the size and pressure of the glue, the size of the needle, and the operating speed , is related to the height of the substrate. In addition, too much glue is one of the reasons that lead to excessive glue. What should we do when we encounter such a situation? : If the glue is too much due to too little glue, we can solve it by adjusting the dilution of the glue. Second: You can solve the problem of more glue at the starting point by adjusting the delay time for opening the plastic. Third: The amount of glue at the corner can be solved by adjusting the turn time. The above three points are all about how to deal with too much glue at the turning point of the dispensing machine. To learn more about dispensers, you can pay attention to our official website.