Recently, ERP announced that a new generation of LED drivers, mainly for outdoor LED lamps, will be released for the first time at the Hong Kong Autumn International Lighting Fair #1D-D31, which will be held on October 27-30, 2016.
The ERP next-generation LED driver is designed to be one-fifth the size of an equivalent energy-efficient driver in the industry; it has a programmable wide range of flexible development space in constant voltage or constant current applications; on wired and wireless control Very intelligent; with high efficiency to reduce power consumption. The new ERP drives are suitable for area lighting, floodlights, parking garages, roads, tunnels and other outdoor lighting. In a typical street lighting application, if two drives are required in the original lighting, now only one ERP drive can be used instead. Using a single ERP drive can save up to 60% space and cut costs by half.
“ERP is helping to promote streetlights, outdoor lighting, industrial and commercial complexes to save power and control other costs,†said Michael Archer, CEO of ERP Electronics. “LED drivers are key components embedded in intelligent lighting control because they can display fixtures State, measure power consumption, optimize energy savings and ensure it adapts to the external environment. In addition to lighting, ERP drivers can be integrated with various sensors as an important part of the Internet of Things (loT) application, which we call optical communication. ."
Programmability output
If the power output is programmable, the customer can configure the same drive on multiple lighting devices. This can reduce the cost of the customer's supply chain inventory. ERP's next-generation driver output is highly efficient and fully programmable between 150W and 260W output current and voltage while maintaining 94% efficiency at 50%-100% load, power factor greater than 0.9, THD less than 20% . The programmable current range is 430 to 1700 mA and the programmable voltage range is 100 to 400 Vdc. Configurable 24V/12V/5V/3.3V auxiliary constant voltage output and external removable or fixed sensor up to 500mA.
Wireless control
According to statistics, more than 30% of lighting energy consumption is wasted when space and rooms are not in use. The US Department of Energy estimates that if the United States reduces the energy use of buildings by 20%, the country can save nearly $80 billion in energy costs annually. LED luminaire manufacturers can use ERP-programmable wireless control drivers to meet standards such as Energy Star 2.0 and California Title 24, bringing the entire line of products to market quickly and developing intelligence in 12 to 18 months. Lighting control while reducing license and research and development costs.
ERP leverages Bluetooth SmartTM and CSRmesh® communications technologies with utility-grade security, proprietary firmware, mobile software applications and loT cloud infrastructure to show that the lighting industry can easily design and install secure, plug-and-play, wireless control Architecture a turnkey solution for applications, cloud and pre-integrated LED drivers. ERP also has other Wi-Fi, ZigBee, or IEEE 802.15.4-based wireless controls and 0-10V dimming devices that support DALI, DMX, Lutron, and other wired protocols.
Quality assurance
The new generation of ERP drives features open-circuit load on output, overvoltage, overtemperature, overcurrent and short circuit (hiccup), advanced surges, up to 6kV line-to-line and 6kV line-to-ground lightning protection. The outdoor grade IP66 housing class guarantees robust and reliable operation. The new LED driver is designed for harsh outdoor environments with over-temperature protection for foldback and auto-recovery and operating temperatures up to 90°C (194°F). The service life is estimated to be 50,000 hours at 70 ° C (158 ° F) convection temperature with a 5-year warranty.
Ultra-thin Insulation Submersible Motor Winding Wire
This products is made of solid copper wire conductor, multi-layer modified materials insulation jacket. It has fine performance for water-resistant, mechanical, electric conducting. It is used to water-filled submersible motor with ultra-thin insulation demands and applied to standard of environmental-friendly.
The conductor is used the standard of GB/T3953, and applied to JB/T4014 standard.
The product can be made according to customers` ultra-thin demands for high-temperature, high-voltage, frequency-conversion, anti-corrosive.
Ultra-Thin Insulation Submersible Motor Winding Wire,Thin-Insulation High-Voltage Submersible Winding Wire,Insulation High Voltage Submersible Wire,Surplus Thin Insulated Submersible Winding Wire
HEBEI GUOQIAN WIRES CO., LTD , https://www.guoqianwires.com