In use, pay attention to the following points:
1. When you cover the top cover of the LCD screen, do not use too much force. When you cover the cover, make sure that there is no foreign matter between the LCD screen and the keyboard.
2. Do not touch the screen with your fingers or hard objects to avoid scratching the LCD screen.
3. Use lens paper or artificial deerskin when cleaning the LCD screen. If the dirt is not easy to remove, use a special LCD screen cleaner. Never use alcohol and common detergents.
4. Each use time should not be too long, because a long period of high load will cause the LCD particles aging failure and generate dead spots. Therefore, if they are over-fatigued during use, these aging phenomena will inevitably accelerate.
5. The brightness should not be too high, the LCD brightness is too high, which will greatly shorten the life of the backlight of the LCD screen. The more electricity is consumed. Therefore, in order to make the life of the LCD screen longer and have a longer battery life, please avoid setting the screen brightness too high. When you don't want to turn off your laptop for a while, you can turn off the LCD screen light.
6. Avoid touching the LCD screen with high temperature and humidity so as not to damage the surface coating of the LCD screen.
7. To reduce the possibility of exposure to sunlight in the sun, use curtains in the daytime and try to prevent the screen from being exposed to sunlight.
8. Remember to turn off the screen when you leave for a long time.
1.ANTENK Flexible Printed Circuit (FPC) and Flexible Flat Cable (FFC) connectors are ZIF (zero insertion force) and LIF (low insertion force) connectors designed to provide a fast, easy, reliable method to make a connection of flexible printed circuits to a PCB. Adam Tech`s special contact design completely preserves conductor integrity by eliminating all wiping action while making connection. Flex circuitry enters the connector and the connector cap is pressed down to capture the flex circuit producing a stable, high pressure connection. Raising the cap releases the pressure for exchange or replacement of circuitry. This series includes single and dual row versions in thru-hole or SMT mounting in vertical or horizontal orientations.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on
FFC Connector Range Available as:
0.3,0.5, 0.8, 1.0,1.25, 2.54mm connector pitch
Surface mount
Side and Top entry
Side entry parts - Top and bottom contact options
ZIF (Zero Insertion Force)
Slide and flip lock actuator styles
Specifications:
Material And Finish:
Insulator: LCP
Lock: PPS
Insert Spring:Phosphor Bronze,
Matte Tin Plated
Solder Platten Area:Phosphor
Bronze,Matte Tin Plated
Voltage:500 V AC(rms)/DC
Current:0.5 A AC(rms)/DC
Contact Resistance:20 mΩ max(initial)
Insulation Resistance:800 MΩ min
Operating Temp:-20°-85°
Fpc Connector,Fpc Cable Connectors,Ffc Cable Connectors,Pitch Fpc Connector,Surface mount FPC/FFC Connectors,Top entry FFC Connectors, Side entry FFC Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com