Dry box technical parameters:
Remarks: Two partitions are standard. If the drying box needs more uniform temperature, it can be made by three-side heating.
The drying oven is used for drying and dry heat sterilization of articles, and the incubator is used for the cultivation of microorganisms and biological materials. The structure and usage of the two instruments are similar. The drying oven is used at a temperature range of 50 to 250 ° C. The blast-type electric heating is used to accelerate the temperature rise. The maximum operating temperature of the incubator is 60 °C.
Insert the thermometer into the seat (in the middle of the top bleed regulator).
Plug the power cord into a power outlet.
Turn the heating wire group into the 1 or 2 position (depending on the desired temperature), at which point the blower can be turned on to promote hot air convection. When the heating wire group is turned on, the red indicator light is on.
Pay attention to the thermometer. When the temperature of the thermometer is about to reach the required temperature, adjust the automatic temperature control knob so that the green indicator light just lights up. Observe the thermometer and indicator light after ten minutes. If the temperature indicated by the thermometer exceeds the demand and the red indicator light is still on, then Rotate the automatic temperature control knob slightly counterclockwise to adjust the temperature to the required temperature. The indicator light turns red and green.
The automatic thermostat knob is on the upper left side of the front of the cabinet. Its scale plate cannot be used as a temperature standard indicator and can only be used as a marker for adjustment.
In the constant temperature process, if three sets of heating wires are not required to be simultaneously heated, only one set of heating wires can be turned on. The more the number of open groups, the faster the temperature rises.
After working for a certain period of time, you can open the top center venting regulator to discharge the moisture, or you can turn on the blower.
After use, turn off the heating wire grouping switch and turn the knob of the automatic thermostat to the zero position in the counterclockwise direction.
Unplug the power cord.
Shangyu Star Equipment Co., Ltd.
Located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province, it is an enterprise integrating production, product research and development, processing and trade. The company's main products: drying box series, incubator series, laboratory muffle furnace series, distilled water series, as well as clean workbench, air shower, fume hood, biological safety cabinet and other complete purification equipment.
The company has a strong technical research and development team, a strong after-sales support service system, is the leader in China's laboratory complete sets of equipment manufacturers, welcome customers to buy.
Silicone Rubber Keypad,Rubber Keypad ,Silicone Keymats,Rubber Key Pad
CIXI MEMBRANE SWITCH FACTORY , https://www.cnjunma.com